A Kickstarter for a low cost Marvell ARM64 board

At the beginning of October a Kickstarter campaign was launched to fund the development of a low-cost board based on one of the latest Marvell ARM 64-bit SoC: the Armada 3700. While being under $50, the board would allow using most of the Armada 3700 features:

  • Gigabit Ethernet
  • SATA
  • USB 3.0
  • miniPCIe

ESPRESSObin interfaces

The Kickstarter campaign was started by Globalscale Technologies, who has already produced numerous Marvell boards in the past: the Armada 370 based Mirabox, the Kirkwood based SheevaPlug, DreamPlug and more.

We pushed the initial support of this SoC to the mainline Linux kernel 6 months ago, and it landed in Linux 4.6. There are still a number of hardware features that are not yet supported in the mainline kernel, but we are actively working on it. As an example, support for the PCIe controller was merged in Linux 4.8, released last Sunday. According to the Kickstarter page the first boards would be delivered in January 2017 and by this time we hope to have managed to push more support for this SoC to the mainline Linux kernel.

We have been working on the mainline support of the Marvell SoC for 4 years and we are glad to see at last the first board under $50 using this SoC. We hope it will help expanding the open source community around this SoC family and will bring more contributions to the Marvell EBU SoCs.

Author: Gregory Clement

Gregory is an embedded Linux, kernel and realtime engineer at Bootlin, which he joined in 2010. Since 2002, he has acquired vast on the field experience in porting and operating embedded Linux, in particular for industrial and transportation customers.

2 thoughts on “A Kickstarter for a low cost Marvell ARM64 board”

  1. Interesting board, I just pledged 🙂

    Do you have a list of the hardware features not yet in Linux ?

Leave a Reply